2.
INSPECT VSV
a. Inspect the VSV for open circuit.
Using an ohmmeter, measure the resistance between the terminals.
Fig. 116: Measuring Resistance Between Terminals Using Ohmmeter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Resistance: 25 to 30 ohm at 20°C (68°F)
If the result is not as specified, replace the VSV.
b. Inspect the VSV for ground.
Using an ohmmeter, check that there is no continuity between each terminal and the VSV body.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:52 PM
Page 119
© 2005 Mitchell Repair Information Company, LLC.