a. Disconnect the sensor connector.
b. Using an ohmmeter, measure the resistance between the each terminals.
Fig. 140: Measuring Resistance Between Each Terminal Using Ohmmeter
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Resistance:
TERMINAL RESISTANCE SPECIFICATION
If the resistance is not as specified, replace the accelerator pedal assembly.
c. Reconnect the sensor connector.
Terminals
Resistance
VCP1 - EP1
2.25 to 4.75 kohm at 20°C (68°F)
VCP2 - EP2
NOTE:
Be careful not to give a shock to the accelerator pedal assembly.
Be careful not to disassemble the accelerator pedal assembly.
2004 Toyota RAV4
2004 ENGINE PERFORMANCE SFI - RAV4
Microsoft
Tuesday, July 21, 2009 4:18:52 PM
Page 146
© 2005 Mitchell Repair Information Company, LLC.