www.toyorobot.com
18
4-1 Transportation
All personal shall bare safety measure while transporting the actuator
regardless the method used, proper gears such as safety helmets and gloves shall
be equipped. The weight of the product is stated in the specification sheet,
please select suitable means to transport.
In case transported by hoists, make sure to use the ropes which can handle
the weight. Please also make sure the rope is properly positioned where the
product is balanced while lifted.
In case transported by folk lifter or cart, make sure the product is properly
positioned to keep its balance and the parts which stands out of the folk or
cart will not collide into any other objects.
The following parts of the actuator are not suitable part to apply force for
transportation.
Carriage.
End plates either sides.
Top Cover.
Any cables whether power cable or signal signals, if the motor is
installed.
4. Installation
