www.toyorobot.com
24
9)
Insert the other end of the belt
into the gear assembled onto
motor, make sure to position the
belt at the center of the gear.
10)
Adjust the tension of the belt by
turning the screw with the open
wrench.
11)
After the tension of the belt has
met the requirement, tighten the
mounting screws of the motor.
12)
Fix the nod on the tension
adjustment screw.
13)
Use a belt tension gauge to
confirm if the belt tension is
correct.
Please refer to
【
Table 1
】
Ball
screw type actuator belt tension
meter.
