TouchTunes Allegro MX-1v, Инструкция по установке и настройке

Страница: 65 / 120

Setting Up the Remote Control
59
Setting Up the Remote Control
TouchTunes’ new wireless remote control is a single-frequency remote that transmits a 433.92
MHz (FSK) signal for jukeboxes with the new receiver/demodulator.
Single-Frequency Wireless Remote
The remote control is RF-based. This eliminates the need to point it directly at the jukebox when
using it. It has a range of up to 200 feet depending on the type of the obstructions between it
and the jukebox. Concrete and metal provide more of a barrier than wood or plaster. The remote
control can also be affected by interference from other RF-based devices.
The remote control is powered by two 1.5V AAA batteries. Insert the batteries in the
compartment on the rear of the remote. Use only high-quality alkaline batteries.
Setting the Remote Control ID
By default, the remote control ID is set to 000. To change it, do the following:
Use the mounting bracket to
install the remote control on a
wall for easy access.
Fasten the bracket to the wall
with two screws as illustrated.
The red indicator LED flashes
when the remote transmits or
when it is being programmed.