TouchTunes Allegro MX-1v, Инструкция по установке и настройке

Страница: 15 / 120

Amplifier Overview
9
• A 3-channel amplifier: This amplifier is incorporated into the Allegro MX-1’s internal sound
system, providing sound for audio zone 1. The 3-channel amplifier supports daisy-chaining of
audio components.
• A 4-channel, 2-zone amplifier: This amplifier provides sound for audio zones 2 and 3, and does
not support daisy-chaining of equipment.
The 3 and 4-channel amplifiers incorporate the following features:
Benefits of these amplifiers include:
• Requirement of only N-Channel MOSFET output transistors.
• Dramatic improvement in efficiency versus Class AB amplifiers.
• Signal fidelity equal to high-quality linear amplifiers.
• High dynamic range compatible with digital media.
Feature/Specification
Four-channel
amplifier
Three-channel
amplifier
Uncompromising sound quality.
9 9
Dynamic range of 102dB.
9 9
Over-current protection.
9 9
Mute input.
9 9
Turn-on and turn-off pop suppression.
9 9
Over-temperature protection.
9 9
High speed switching power supply.
9 9
Less heat, smaller footprint.
9 9
Total harmonic distortion
≤
0.05% (1W).
9 9
S
ignal-to-noise ratio
≥
105dB (A-weighted).
9 9
Two balanced inputs.
9
One input supporting daisy-chaining.
9
Two stereo outputs (full-range).
9
One stereo output (midrange and high
frequencies)
One bass output (low frequency).
9
AC line voltage and frequency:
90 to 130 V AC/ 50 - 60 Hz
9 9
4-ohm (minimum) load per channel (150W).
9 9
8-ohm per channel (75W).
9 9