TouchLink TLC Pro 521M, Руководство пользователя

Страница: 36 / 37

Activation
To toggle between stop and start:
1.
Hold down the
Reset
button for approximately 3 seconds until the Power LED blinks
once.
2.
Release and press
Reset
momentarily (for <1 second) within 1 second. Nothing happens
if the momentary press does not occur within 1 second.
Result
The LED flashes twice if the program is starting or three times if the program is stopping.
Reset All IP Settings
This mode resets all IP settings to factory defaults.
Activation
To reset all IP settings:
1.
Hold down the
Reset
button for approximately 6 seconds until the Power LED blinks
twice (once at 3 seconds, again at 6 seconds).
2.
Release and press
Reset
momentarily (for <1 second) within 1 second. Nothing happens
if the momentary press does not occur within 1 second.
Result
Reset All IP Settings mode:
• Sets the IP address back to factory default (192.168.254.251 for the TLP Pro 520M and
192.168.254.252 for the TLC Pro 521M).
• Sets the subnet back to factory default (255.255.255.0).
•
Sets the default gateway address to the factory default (0.0.0.0).
• Sets all other IP settings, addresses, and domain and host names back to factory default.
• Turns DHCP off.
Reset to Factory Defaults
This mode resets all IP settings and touchpanel settings to factory defaults and removes all
configurations. It allows you to start over with configuration and uploading.
Activation
To reset the unit to all factory default settings:
1.
Hold down the
Reset
button for approximately 9 seconds until the Power LED blinks
three times (once at 3 seconds, again at 6 seconds, again at 9 seconds).
2.
Release and press Reset momentarily (for <1 second) within 1 second. Nothing happens
if the momentary press does not occur within 1 second.
Result
Reset to Factory Defaults mode performs a complete reset to factory defaults (except the
firmware).
• Does everything Reset All IP Settings mode does (see above).
• Removes touchpanel configurations and user interface.
•
Resets all touchpanel settings to factory default.
TLP Pro 520M and TLC Pro 521M • Reference Material 28