9.
Remove the bezel by inserting the provided Extron pry tool into one of the notches on the
bottom surface of the bezel (
9
). Slowly move the tool along the edge to separate the
bezel from the frame of the touchpanel. The notches are on the bottom surface of both
the landscape and portrait bezels.
10.
Attach the touchpanel to the wallplate adapter with the two provided #4-40 x ¼” Phillips
head screws (
¢
). For extra security, use two security screws (not provided).
11.
Reattach the bezel.
12.
If required, perform the initial configuration, using the
Setup Menu
(see page 14).
TLP Pro 520M snaps
to wallplate adapter
(2 places on each side).
Tighten screws to
rotate locking arms
and secure wallplate
adapter.
TLP Pro 520M
Mounting
Screws (2)
Remove
Bezel.
5
10
9
8
Figure 22.
Mounting the TLP Pro 520M
TLP Pro 520M and TLC Pro 521M • Mounting
24
Содержание TLC Pro 521M
Страница 6: ......
Страница 8: ...TLP Pro 520M and TLC Pro 521M Contents viii...