Troubleshooting
Warm air drying
Trouble
Please check
Ref.
Page
The dryer
temperature is low
●
Is the dryer temperature set to low level?
20
Stops in the middle
of use
●
The feature stops automatically after about 10 minutes of continuous use.
●
Does the seat switch have difficulty detecting?
➞
Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on
the seat, the seating switch may temporarily stop detecting your presence.
-
11
Toilet Seat and Toilet Lid
Trouble
Please check
Ref.
Page
The toilet seat is
cold
●
Is the toilet seat temperature set to "OFF" or a low level?
20
●
Is energy saver in operation?
•
The energy saver feature is on when the "Energy saver" LED is on and the
"Power" LED is off on the main display.
When you sit on the seat, the toilet seat heater is turned on temporarily and
the seat is warmed in about 15 minutes.
➞
You can turn it "OFF" if the energy saver feature is "ON".
22, 23
24, 25
●
Have you been seated for a long time?
•
After about 20 minutes of sitting, the temperature starts reducing, and after
about 1 hour, the toilet seat heater is turned "OFF".
➞
Stand up from the seat and then use again.
●
Did you put anything on the toilet seat or the toilet lid?
➞
Remove anything placed on top of the toilet seat or lid.
-
-
●
Is a toilet lid or seat cover installed?
➞
Remove any covers.
11
Energy Saver
Trouble
Please check
Ref.
Page
The energy saver LED
does not light up
●
Did you unplug the power plug or was there a power outage?
•
•
The "Energy saver" LED on the main display may go off when the power is
turned on even if the energy saver feature is "ON".
(It will turn on within about 24 hours since the setting is retained.)
-
The timer energy saver
feature is not working
●
Have the batteries in the remote control been replaced?
•
•
"Timer energy saver" may be canceled when the batteries are replaced.
➞
Set the timer energy saver again at the time you want to start it.
25
The auto energy saver
feature is not working
●
Because this function takes several days learning the usage conditions
before starting energy saver, the amount of energy saving may be low,
depending on the frequency of use.
➞
Check the energy saver setting.
22, 23
44