CAUTION
Troubleshooting
Shutoff valve
■
While the LED is illuminated, energy saver
(Pages 22, 23)
is in operation, so the toilet seat temperature may be
reduced or the warm water heater and toilet seat heater
may be turned off.
■
Is the "
" LED on the back
of the remote controller flashing?
➝
Replace the batteries. (Pages 14, 38)
■
Is the remote control transmitter
or the remote control receiver
blocked?
➝
Remove obstructions, dirt, water
droplets or any other blockages.
Please check first
Is the Power LED
illuminated?
Is the Energy saver
LED illuminated?
Is the remote control
working?
First, try the actions described on pages 42 - 45.
If the problem persists, consult the installer, seller, or
TOTO customer service.
(see contact information on the back cover.)
If a water leak occurs, close
the shutoff valve.
■
Is the breaker on the distribution board turned on?
→ Check whether there is a power outage or the breaker has turned
"OFF".
■
Is the "Power ON/OFF" setting "OFF"?
→ Switch it to "ON" with the remote control. (Page 15 Step
2
-
2
)
■
Is the "Power" LED on the
main display flashing?
→ The main unit is not mounted
properly. Mount them correctly
again. (Pages 34, 35)
<Power>
The remote
control uses
batteries
to operate.
Remote control receiver
Remote control
transmitter
42