Basic Operation
Using the Remote Control
*1
Stopping
Drying
Washing
"Front washing"
Serves as a bidet for ladies.
"Rear soft washing"
Washes your rear with
mild water pressure.
"Stop"
Stops the operation.
"Warm air drying"
Dries your rear.
"Rear washing"
Washes your rear.
•
The setting changes between
and each time the
is pressed.
Operate the controls on the remote control; a beep sounds when the main unit
receives the signal.
●
Functions that operate when
a button is pressed during
"Rear washing", "Rear soft
washing" or "Front washing".
"Personal setting lock"
You can store your preferred "Wand position", "Water
pressure" and "Warm water temperature" settings.
●
To store a setting
While washing is in progress, set your preferred "Wand position",
"Water pressure" and "Warm water temperature" and then press
and hold or for 2 seconds or longer.
●
To use
Press or , and then press the button for the washing you want to use.
•
The "Wand position" and "Water pressure" lamps will light up for about 10
seconds in their set positions, and the "Water temperature" display switches.
•
The setting changes between "ON" and
"OFF" each time the button is pressed.
You can adjust the water pressure
to one of fi ve levels.
([-] Softer, [+] Stronger)
•
After you press the "Water pressure
adjustment" button, the set position
will light for 10 seconds."
You can adjust the washing position to
5 diff erent points between the front and
the rear, using the [▲] and [▼] buttons.
•
After you press the "Wand position
adjustment" button, the set position
will light for 10 seconds."
•
Once use of the remote control is
fi nished, the settings will return to the
initial setting (3rd position) after a while,
not exceeding a maximum of 5 minutes.
•
Once use of the remote control is
fi nished, the settings will return to the
initial setting (3rd position) after a while,
not exceeding a maximum of 5 minutes.
"Oscillating washing"
The wand moves back and forth
to wash your rear thoroughly.
"Water pressure adjustment"
"Wand position adjustment"
Note
•
Sitting back on the toilet seat
makes it easier to adjust the wand
position and to reduce splashing.
*1 Remote control transmitter (Front side, Top side)
"Pulsating washing"
Washes with the water pressure
pulsating between soft and strong.
Cleans the wand with "".
•
This function will operate
automatically after using the
washing functions (Rear washing,
Front washing, etc.). (Page 16)
"Wand CLEAN"
18
