Freeze Damage Prevention
Water supply hose
Horizontally
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing.
•
When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, do not use the energy saver feature.
(May damage the product.)
•
Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 32 °F (0 °C).
Attention!
How to freeze damage prevention
1
Close the shutoff valve.
(Page 37)
•
The water supply stops.
Do not remove the water filter drain valve
while the shutoff valve is open.
(Otherwise, water may leak out)
CAUTION
■
To use the product again
•
The water needs to be resupplied. (Page 40)
7
(2) [Applicable to SW3084, SW3083 only]
•
Drain the water from the water supply hose.
• Insert the water filter drain valve and use a
flat-head screwdriver to tighten it securely.
(3) When water draining is completed, reinstall
the water filter drain valve and cover.
6
Insert the power plug.
•
The "Power" LED illuminates.
Set the water and toilet seat
temperature to "High".
(Page 20)
•
To maintain the temperature, close the toilet seat
and toilet lid after finishing work.
2
Drain the water from the toilet
tank.
•
Manipulate the lever/button/etc. until the
water stops.
4
Unplug the power plug.
5
Drain the pipe.
(1)
Remove the cover and water filter drain valve.
• Loosen the water filter drain valve with a
flat-head screwdriver and then pull it.
Flat-head screwdriver
Cover
Water filter drain
valve
3
Press "Wand CLEAN" button.
(Release the pressure from the water supply
pipe.)
39
Reference
