STEP • 8
STEP • 9
08
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x2
4.0 x 70mm
Per Floor Section
x3
x3
x3
4.0 x 70mm
4.0 x 70mm
Per Panel Edge
Per Panel Edge
4ft LEFT SIDE PANEL
2ft LEFT SIDE PANEL
2ft LEFT SIDE PANEL
Attach 2ft Blank Section
to the Left Side Wall
8a.
Place the 2ft panel at
the far left of the shed,
connecting it with the rear
sections. (Same placement
as the right side 2ft panel
just on the other side).
8b.
Fix the panels togeth-
er with screws as shown
on the diagram. You may
require some supports to
keep the frame upright
whilst building the longer
sheds.
DO NOT
screw the standing panels
down to the floor just yet.
Leave room for
adjustments when the final frame is fitted.
DO NOT
screw the standing panels
down to the floor just yet.
Leave room for
adjustments when the final frame is fitted.
8a.
9a.
4ft LEFT SIDE PANEL
Now attach Left Side
Panel (4ft wide section)
9a.
Place the 4ft Left side
panel as shown below.
Screw sections together
as shown in diagram 7a.
9b.
Check that all the
frames are
correctly fixed and
screwed together from the
sides. Use more screws to
strengthen if necessary.
