STEP • 16
STEP • 17
12
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x2
4.0 x 70mm
Per Floor Section
x3
x29
x4
4.0 x 70mm
4.0 x 70mm
Per Roof Panel
PENT ROOF PANELS
SIDE & CORNER STRIPS
SIDE & CORNER STRIPS
Hide the panel edges.
Cover the framework &
seams.
16a.
Use all the side/corner strips to fin-
ish off the shed, by covering any exposed
framework and the panel joining seams.
INFORMATION
The Corner Strips cover all panel edges. Remeber
to attach these to the exterior back panels too.
16b
PENT ROOF PANELS
Place First roof section.
Repeat for all Roof Panels
(2ft, 3ft, 4ft)
17a.
Place the 2ft x 4ft roof section in
place. Repeat this stage for models as
shown below. 4ft roof section will always
be in the cenre (Except from with the 6ft
Model).
17b.
Screw the roof panel
down as shown in diagram 15b.
INFORMATION
The Roof Panels are placed ontop of the appro-
priate front Panel, making sure that the sizes
corrispond correcly.
17b
