STEP • 6
STEP • 7
07
3ft REAR PANEL
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x2
4.0 x 70mm
Per Floor Section
x3
x3
x3
4.0 x 70mm
4.0 x 70mm
Per Panel Edge
Per Panel Edge
4ft REAR PANEL
3FT BLANK
PANEL
4FT BLANK
PANEL
3ft REAR PANELS
Fix 3ft Wide Blank Section
Back Panel 3ft Section
6a.
Now place a blank 3ft panel side as shown.
Repeat this step for all other sheds. Please
use reference on above for correct sections
required according to your shed size.
INFORMATION
Repeat Step 4, making sure that the back
panel sizes corrisponds with
the floor size.
4ft REAR PANEL
Fix 4ft Wide Blank Section
Back Panel 4ft (Middle)
INFORMATION
All of the Sheds, no matter the length or depth will have the 4ft back section located in the
centre of the summer shed.
7a.
Place the 4ft panel
side against the corner
of the back 4ft floor as
shown making sure the
panel is sitting firmly
on the shed floor and
the side meeting the
framework of the back
3ft blank panel.
7b.
7b.
Fix the panels
together with screws as
shown in diagram. You
may require some sup-
ports to keep the frame
upright whilst building
longer sheds.
