STEP • 14
STEP •15
11
SIDE PENT ANGE TOPS
= Drill Points using
screws provided as shown
= Drill Points using
screws provided as shown
x2
4.0 x 70mm
Per Floor Section
x3
x2
4.0 x 70mm
Per Floor Section
x3
x4
x2
4.0 x 70mm
4.0 x 70mm
Per Front Top
PENT FRONT TOPS
SIDE PENT ANGLE TOPS
Now attach all the 6ft
Side Tops of Pent Shed
End Panels. (Over the top
of both side panels).
14a.
Place the right and left Pent Angle Tops as shown below. Make sure the higher ends are at
the front of the shed as shown in the diagram below.
14b.
Adjust the panels so that the tounge & groove are fixed together in place correctly.
Use a hammer to lightly tap in to the grooves to create a perfect fit.
14c.
Attach the sections down by screwing through the inner frameworks of both panels.
PENT FRONT TOPS
Place the front tops of
shed. Use 2ft Section for
below models.
15a.
Place the Pent Front Top sections in place. Use the corrisponding sized tops with the
correct sections. Make sure the correct section is placed on top of the correct front panel only as
shown in the diagram.
15b.
Adjust the panels so that the tounge & groove are fixed together in place correctly.
Use a hammer to lightly tap in to the grooves to create a perfect fit.
15c.
Attach the sections down by
screwing through the inner frame-
work of both panels.
