Total Control Systems 700-LP Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 48

Page 2
Safety Warning Symbols 2
Receipt & Inspection 3
Notice 3
Meter Overview 4
Meter Specifications 4
Material of Construction 4
Procedures for LPG Meters 5
System Recommendations 6
System Recommendations (Continued) 7
Start Up Recommendations 8
Direction of Flow 9
Meter Dimensions 10
Meter Calibration 11
Calibration Adjustment 11
Maintenance 12
Maintenance (Continued) 13
Storage Instructions 13
Meter Assembly (Exploded View) 14
Meter Assembly (Bill of Material) 15
Air Eliminator Assembly 16
Air Eliminator Assembly (Continued) 17
Strainer Assembly 18
Strainer Assembly (Continued) 19
Differential Valve Assembly 20
Differential Valve Assembly (continued) 21
Back Check Valve Assembly 22
Table of Contents
Back Check Valve Assembly (continued) 23
Torque Specifications 24
Torque Specifications (continued) 25
Drive Components 26
Disassembly of Meter 27
Disassembly of Meter (Continued) 28
Disassembly of Meter (Continued) 29
Inspection of Parts 30
Re-Assembly of Meter 31
Re-Assembly of Meter (Continued) 32
Re-Assembly of Meter (Continued) 33
Re-Assembly of Meter (Continued) 34
Assembly of Strainer 35
Assembly of Air Eliminator 36
Assembly of Differential Valve 37
Assembly of In-line Check Valve 38
Meter Trouble Shooting 39
Air Eliminator Trouble Shooting 40
Differential Valve Trouble Shooting 40
MSDS 41
MSDS (Continued) 42
MSDS (Continued) 43
MSDS (Continued) 44
Notes 45
Notes (Continued) 46
Warranty 47
Warning Symbols
CAUTION
Follow the warning instructions within the fol-
lowing information to avoid equipment failure,
personal injury or death.
TURN POWER OFF
Before performing any maintenance, be sure to
turn system power off to avoid any potential
electric spark
FLAMMABLE
Flammable liquids and their vapors may cause a
fire or explosion if ignited.
EYE PROTECTION
Pressurized systems may cause hazardous leaks
and spray that may be dangerous for your eyes.
Always wear eye protection around pressurized
systems and its hazardous liquids.
INJURY
Wear gloves for protection from hazardous liq-
uids that may cause irritation or burns.
READ
Read and understand all related manuals thor-
oughly. The Engineering and OIM manuals will
provide the knowledge for all systems, mainte-
nance and operation procedures. If you have any
questions, please consult the factory.