38
RE V. 1.0-12 /16
Fig.6.10
4) Follow the diagram for lamination film installation.
Lamination film installation must be carried out only with cold rollers
BOTH SIDES LAMINATION
Top roll film
Upper traction roll
Lower traction roll
Lower heated roll
Lower stabilizer bar
Upper stabilizer bar
Bottom roll film
Upper heated roll
SINGLE SIDE LAMINATION
Upper stabilizer bar
Top roll film
Upper traction roll
Lower traction roll
Anti curl bar
Upper heated roll
Fig.6.11
Usually the glossy side is the plastic one which needs to laid on the rollers. The matte side is the glued one. In case of matt
lamination film the 2 sides are very similar. Please check the correct position carefully.
Adhesive side must not face the roller.
Upper lamination roll:
insert the lamination roll into the reel holder (follow above instructions and make sure the right side of the film
will face the roller). Keep the lamination roll on the core adaptors as these will avoid lamination film rotating on the shaft. Screw the core
adaptor’s bolts tightly.
Place the roll shaft on the brackets and make sure it’s securely fixed in.
Ch a P t ER 6: iNst RuC t iONs
