Toshiba Strata CTX100, Руководство по установке и обслуживанию

Страница: 294 / 348

Station Apparatus
Cordless Digital Telephones
8-32
Strata CTX I&M 10/02
➤
To mount on a wall
1. Select a wall location near a 120VAC outlet and within
reach of the Strata CTX digital line connection.
2. Place the wall plate (shown at right) against the wall, and
with a pencil, mark the position of the screws.With a
punch tool, punch “starter” holes in the wall.
3. Align the wall plate and screws on the wall where the
“starter” holes are and tighten down the screws.
4. Ensure that the wall-mount plate is placed on the wall so
that the “feet” are at the bottom when you are looking at the
inside of the plate.
5. Snap the Base Unit onto the plate.
Telephone Cord Connection
There are two telephone line jacks on the back of the base unit
of your cordless digital telephone: “Line In” and “Line Out.”
You can connect the cordless digital telephone to both the
telephone line and a Strata CTX digital telephone.
➤
To connect cords for use as a stand-alone telephone
➤
Connect the modular jack labeled “Line In” to the telephone wall jack.
...or
➤
To connect cords for use with a desk telephone
1. Unplug the telephone line cord from your desk telephone.
2. Connect this cord to “Line In” of your cordless telephone.
3. Using the two foot modular cord that came with your cordless telephone, connect the jack
labeled “Line Out” to the desk telephone.
Connect and Apply Power to Base Unit
The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug
having one blade wider than the other). This plug fits into the power outlet only one way. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit,
contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the
blades on the polarized plug.
4449
4507