Toshiba Strata AirLink DK40, Руководство по программированию

Страница: 79 / 378

Program 10-2 System Assignments, Part 2 of 5 System & Station
Strata DK40 Programming Manual Spring 1999
3-21
LED 14: Privacy Override Warning Tone
Privacy Override allows a station user to enter an existing Exchange line conversation by
pressing an Exchange
/LQH
button (if the called station is assigned in Program 30). A
warning tone can be set optionally to be heard by the conversing parties.
LED 13: Auto Callback Camp-on Tone
A called busy digital or electronic telephone user may optionally hear a one-time beep tone
(from the speaker) signifying that another station has tried to call and has activated the
Automatic Callback feature.
LED 12: Exchange Line Beep Tone
If this LED is lit, a beep tone will be sent every three minutes to stations on outgoing
exchange line calls.
LED 11: Dual-tone Multi-frequency (DTMF) Tone Return
This option deletes DTMF tones that are returned to digital or electronic telephones when
manually dialling or speed dialling. It also eliminates auto dial digits returned to callers when
digits are automatically sent to voice mail ports on forwarded calls.
LEDs 10 and 09: Background Music/Music-on-Hold Separation
An alternate Background Music (BGM) source can be sent to digital telephone speakers,
electronic telephone speakers, and external page speakers, while another Music-on-hold
(MOH) source can be sent to lines or internal stations on hold.
The alternate BGM source can be connected to circuit 2 on a PSTU, KSTU3, RSTU. LEDs
09 and 10 should be OFF for RSTU, RSTU3 and PSTU alternate BGM. Also run Program 19
to assign BGM to a PCB slot number.
◆
DK40: The normal MOH source can be connected to the MOH RCA jack on DK40
KSU.
LED 08: Display Dialled Number Timing
An LCD telephone will display a dialled number on outgoing calls and the Exchange line
(Program 93) ID name, information on incoming calls for either 15 or 60 seconds before the
display changes to the elapsed time of the call.
LED 07: Standard Telephone Distinctive Ring
If Distinctive Ring is enabled (LED 07 ON) the Exchange line call ring pattern is standard:
0.2 seconds on, 0.4 seconds off, 0.2 seconds on, 3.4 seconds off; intercom ring is always 1
second on, 3 seconds off. This does not apply to VM Ports (Program 31, LED 17 ON) which
are always standard ring. The line call ring pattern to standard telephones can be made
distinct from the intercom ring pattern.
If Distinctive Ring is not enabled (LED 07 OFF), the pattern is per Program 10-1, LED 06.
Intercom, Transferred and tie line calls, with or without Distinctive Ring enabled, ring with a
1-second on and 3-seconds off pattern.