Toshiba Satellite A100 Series Скачать руководство пользователя страница 105

Страница: 105 / 294

3.3 Option

3 Diagnostic Programs

Satellite A100/A105 / TECRA A7 Maintenance Manual 29

If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with
the name specified in 'Log File Name' will be generated.

Log Options

Log Errors

If selecting this parameter, errors will be recorded when the test fails.

Log Test Activities

If selecting this parameter, the subtest results will be recorded.

Log Test Start Time

If selecting this parameter, the start time of the test will be recorded.

Log Test End Time

If selecting this parameter, the end time of the test will be recorded.

Log Errors Only

If selecting this parameter, errors will be recorded only when the test fails.

Log Errors Only with Time

If selecting this parameter, errors and time will be recorded only when the test

fails.

Append to Old Log File

If selecting this parameter, the new log will be added to the old one.

Log Device Info on Fail

If selecting this parameter, details of the failed test will be recorded.

Log file Name

Specify the Log file name. You can input the detail path of the file. System will
show the detail path of the file.

3.3.7 Specify LOG Viewer

You can specify the Log file viewer in the Specify Log Viewer screen.

Содержание Satellite A100 Series







































































































































































































































































































Результаты поиска

Содержание Satellite A100 Series

Отзывы:

Toshiba Satellite A100 Series, Руководство по обслуживанию, Страница: 105 / 294

Результаты поиска

Содержание Satellite A100 Series

Отзывы: