Toshiba RAV-HM1101CTP Series, Руководство по обслуживанию

Страница: 78 / 118

9
-1-4. Function Selection Setup
<Procedure> Perform setting while the air conditioner stops.
<RBC-ASCU1
∗∗∗∗∗
>
1
Push and hold menu button and [ ] setting button simultaneously for 10 seconds or more.
• After a while, the display flashes as shown in the figure. “ALL” is displayed as indoor unit numbers during
initial communication immediately after the power has been turned on.
2
Each time [ ] [ ] setting button is pushed, indoor unit numbers in the group control
change cyclically. Select the indoor unit to change settings for.
• The fan of the selected indoor unit runs . The indoor unit can be confirmed for which to change settings.
3,6
4,5 1 7
2,4,5
Indoor unit No.
4
Push the menu button to make Code No. [
∗∗ ∗∗
∗∗ ∗∗
∗∗
] flash. Change Code No. [
∗∗ ∗∗
∗∗ ∗∗
∗∗
] with [ ]
[ ] setting button.
5
Push the menu button to make Set data [
∗∗∗∗ ∗∗∗∗
∗∗∗∗ ∗∗∗∗ ∗∗∗∗
] flash. Change Set data [
∗∗∗∗ ∗∗∗∗
∗∗∗∗ ∗∗∗∗ ∗∗∗∗
] with
[ ] [ ] setting button.
6
Push OFF timer button to complete the set up.
• To change other settings of the selected indoor unit, repeat from Procedure
4
.
7
When all the settings have been completed, push ON/OFF button to finish the settings.
(Return to the normal mode)
“
S ETTING
“ flashes and then the display content disappears and the air conditioner enters the normal stop
mode. (The remote controller is unavailable while “
S ETTING
“ is flashing.)
• To change settings of another indoor unit, repeat from Procedure
1
.
3
Push OFF timer button to confirm the selected indoor unit.
Set data
Code No.
- 78 -