Toshiba E-tudio190F, Руководство оператора

Страница: 146 / 208

Document Fax
146
For the Network Connected Models
Document Fax
uses the fax modem in the your machine connected on your network (LAN) for fax
communication.
Before using the
Document Fax , it is necessary to activate the Fax Modem and to setup certain
parameters. Follow the steps below to setup the Document Fax .
Installation
Installation and Setup (For the Network Connected Models)
1 Confirm the following device settings.
Send Only System settings:
Connection to the network
Set Internet parameters:
- IP Address
- Subnet Mask
- Default Gateway IP Address
- Relay XMT Password
Set Fax Parameters:
- Set the Relay XMT Report = Off (Fax Parameter No. 143. See the Operator's Manual for Facsimile and
Internet Fax/Email)
Send & Receive System settings:
Connection to the network
Set Internet parameters:
- IP Address
- Subnet Mask
- Default Gateway IP Address
- Email Address
- Email Server Name/IP Address
- Relay XMT Password
Set Fax Parameters:
- Set the Relay XMT Report = Always (Fax Parameter No. 143. See the Operator's Manual for Facsimile and
Internet Fax/Email)
- Set the Fax Forward to Receive Email Account (Fax Parameter No. 054. See the Operator's Manual for
Facsimile and Internet Fax/Email)
2 Install the Document Management System.
Refer to the Installation section of this Operator's Manual.
Note:
The Document Fax is not installed automatically with the TYPICAL installation. Select CUSTOM installation and
check the Document Fax to be installed.