Toshiba e-STUDIO35, Руководство оператора

Страница: 35 / 124

1
2
3
4
5
6
7
8
9
10
11
12
2-18
SENDING A FAX (BASIC)
In the memory transmission, when you have placed the originals and performed the sending
operation, the original is scanned and temporarily stored in the memory, and then sent.
• Originals are scanned at high speed and stored in the memory. So, you can return originals to files
and filing cabinets immediately.
• Up to 100 documents can be stored in the memory.
• You can specify two or more remote FAXes at once. Multi-address transmission
Page 2-15
• If the original cannot be sent as the remote FAX is busy, the remote FAX is automatically redialed
repeatedly.
• Information can no longer be stored in the memory if it becomes full midway during scanning.
In this case, reduce the number of originals you are sending, or try sending in the direct TX mode.
Page 2-19
• If an original is placed on the original glass, the scanning conditions can be changed for each page.
Page 2-11
6. SENDING ORIGINALS
Memory TX
1
Place the original.
Page 2-6
2 Set the transmission conditions
. Page 2-10
3 Specify the remote FAXes.
• Specifying by digital keys Page 2-12
• Specifying by phone book Page 2-13
• Specifying by group Page 2-14
• Specifying by multi-address transmission Page 2-15
4 Press the START key.
• The original starts to be scanned and is stored in the
memory.
Tip
• If the transmission fails, the memory transmission report will
automatically be output. Page 5-39
• Canceling transmissions Page 2-22
#02-12_Fax Basic.p65 10/3/00, 6:47 PM 18