e-STUDIO203S/203SD TEST COMMAND, TROUBLE CODES 10 - 24
48
01
Main scan/sub scan
direction magnification ratio
(COPY MAG.)
[Function]
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direc-
tion.
Enter the adjustment value with [10KEY]. Press [START] key to save the set value and make a
copy. (When the adjustment value is increased by 1, the magnification ratio is increased by
0.1%.)
The adjustment mode can be changed by pressing [
←
/
→
] key. (Adjustment range: 1 – 99,
Default: 50)
[Operation]
The operation is similar to test command 46-01.
05
RADF mode sub scan
direction magnification ratio
in copying (RADF MAG.)
[Function]
Used to display the current RADF mode sub scan direction magnification ratio on the LCD.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a
copy is made. (When the set value is increased by 1, the magnification ratio is increased by
0.1%.)
The adjustment mode can be changed by pressing [
←
/
→
] key. (Adjustment range: 1 – 99,
Default: 50)
When adjusting the RADF, the mode is set to "Duplex
→
Single," single copies of two sheets are
performed.
For printing, regardless of the density mode and the density level,
Density mode = MANUAL
Density level = 3
∗
When there is no document in RADF, copy is inhibited.
[Operation]
The operation is similar to test command 46-01.
Main
code
Sub
code
Contents
Details of function/operation
Mode
Display item
Default value
LED
Main scan direction magnification ratio
F-R
50
PRINT mode lamp
OC mode sub scan direction
magnification ratio
SCAN
50
SCAN mode lamp
Mode
Initial value of
duplex setting
Display
item
Default
LED
Sub scan magnification ratio adjustment
on the front surface of RADF document
S-S
SIDE1
50
COPY
mode lamp
Sub scan magnification ratio adjustment
on the back surface of RADF document
D-S
SIDE2
50
PRINT
mode lamp
