Toshiba e-STUDIO203S, Руководство по обслуживанию

Страница: 88 / 168

e-STUDIO203S/203SD TEST COMMAND, TROUBLE CODES 10 - 7
9 01 Duplex motor normal
rotation check (DPLX ROT.)
(e-STUDIO203SD only) [Function]
Use the duplex motor Bios to drive the duplex motor in the normal direction (paper exit direc-
tion) for 30sec.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation]
02 Duplex motor reverse
rotation check (DPLX
ROT.REV.)
(e-STUDIO203SD only) [Function]
Use the duplex motor Bios to drive the duplex motor in the reverse direction for 30sec.
After completion of this process, the machine goes into the sub code entry standby mode.
[Operation]
04 Duplex motor rotating speed
adjustment (DPLX ROT.
SPEED)
(e-STUDIO203SD only) [Function]
When this Test Command is executed, the currently set value is displayed.
Enter the adjustment value with [10KEY] and press [ENTER/START] key. The entered value is
stored and the machine goes into the sub code entry standby mode. The greater the set value
is, the higher the speed is. The smaller the set value is, the lower the speed is.
(Setting range: 1 - 13, Default: 8)
[Operation]
10 Toner motor operation
(TONER MOTOR) [Function]
When [ENTER/START] key is pressed, the toner motor is rotated for 30sec.
After completion of this process, the machine goes into the main code entry standby mode.
[Operation]
14 Cancel of trouble other than
U2 (TRBL CANC.) [Function]
Used to cancel troubles other than U2.
∗
Cancel troubles such as H trouble which writes data into EEPROM, and perform hardware
reset.
[Operation]
16 U2 trouble cancel (U2 TRBL
CANC.) [Function]
Used to cancel U2 trouble.
When [ENTER/START] key is pressed, check sum of the total counter in the EEPROM is rewrit-
ten and hardware reset is made.
[Operation]
20 01 Maintenance counter clear
(M-CNT CLR.) [Function]
When [ENTER/START] key is pressed, the maintenance count value is cleared and "000,000" is
displayed.
[Operation]
Main
code Sub
code
Contents Details of function/operation
1) Initial display
09-01 DPLX ROT.
EXECUTING...
1) Initial display
09-02 DPLX ROT.REV.
EXECUTING...
1) Initial display 2) [10KEY] 3) [ENTER/START]
09-04 DPLX ROT.SPEED
8( 1-13)
09-04 DPLX ROT.SPEED
7( 1-13)
09-04 DPLX ROT.SPEED
7( 1-13)
1) Initial display
10-00 TONER MOTOR
EXECUTING...
1) Initial display
14-00 TRBL CANC.
CLEARED
1) Initial display
16-00 U2 TRBL CANC.
CLEARED
1) Initial display
20-01 M-CNT CLR.
CLEARED 000,000