e-STUDIO203S/203SD DISASSEMBLY AND ASSEMBLY 8 - 12
9) Disengage the pawl, and remove the roller knob.
10) Disengage the pawl, and shift the pulley and the bearing.
11) Remove the paper exit roller, and remove the belt, the pulley,
and the bearing.
12) Remove the connector and the screw, and remove the speaker
unit. (When the GD-1300 is installed)
13) Remove the connector.
14) Remove four screws, and remove the FAX PWB unit. (When the
GD-1300 is installed)
15) Disconnect the connectors.
16) Remove three screws, and remove the MCU PWB.
17) Remove two screws and remove the toner motor.
1)
2)
3)
4)
1)
2)
2)
2)
3)
1)
2)
2)
1)
1)
1)
2)
2)
2)
3)
1)
2)
