Toshiba E-STUDIO2008A, Руководство по обслуживанию, Страница: 376 / 1016

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 58
• Type of calculated data
Since this is multifunctional, the data of pixel count is calculated for each function.
The following list is the information that can be confirmed by LCD screen. But actually, more
information can be confirmed by the FS-08.
See after-mentioned “5)-Display in the FS-08 for details.

: With data

: Without data
Table 5-1 Type of calculated data
• Setting related with the pixel counter function
Standard paper size setting
The standard paper size (A4 or LT) to convert it into the pixel count is selected (FS-08-6500).
Pixel counter display setting
Whether or not to display the pixel counter on the LCD screen is selected (FS-08-6504).
Display reference setting
The reference when displaying the pixel counter on the LCD screen (toner cartridge reference or
service technician reference) is selected (FS-08-6505).
Determination counter of toner empty
This is the counter to determine the replacement of new toner cartridge after the toner empty is
detected.
After the toner empty is detected by the auto-toner sensor, this counter checks if toner empty is not
detected one more time while the specified number of pixel count or output pages is counted.
Pixel counter clearing
There are 3 types for the pixel count clear as follows:
FS-08-6501: All information related to the pixel count is cleared.
FS-08-6502: All information related to the service technician reference pixel count is cleared.
FS-08-6503: All information related to the toner cartridge reference pixel count is cleared.
Toner cartridge reference Service technician reference
Copier function
 
Printer function
 
FAX function
 
Total
 