Toshiba E-STUDIO2008A, Руководство по обслуживанию, Страница: 1000 / 1016

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
BACKUP FUNCTION
12 - 12
12.3 High Security Mode
12.3.1 General description
The High Security Mode is a security mode complying with the IEEE2600.1 Security Standards
Requirement. To have the equipment enter this mode, follow the procedure and the precautions below.
12.3.2 Prior confirmation
• Confirm that the administrator for the equipment is authorized and ask him/her to observe the
installation.
• To have the equipment enter the High Security Mode, the Data Overwrite Enabler GP-1070
(optional) is required. Confirm that this option is installed in advance. Follow the Unpacking
Instructions to install it.
• To avoid physical security problems, such as hardware removal or inappropriate disassembly at the
installation site, take all necessary measures, such as checking who enters and leaves the site.
• Confirm that no received fax data or print jobs in progress exist. If there are any, be sure to print
them all out before entering the High Security Mode.
• The HDD is initialized in the High Security Mode. Be sure first to back up user data such as
documents, Address Book, templates or fax settings using the export function or the backup/restore
utility of the TopAccess. Refer to items noted in

P. 12-6 "12.2 AES Data Encryption Function
Setting".
• Make a note of the settings on the Administration tab page of the TopAccess in advance.
• Compatibility of cloning data is lost between the High Security Mode and the normal mode;
therefore, cloning data cannot be imported.
12.3.3 Procedure for entering the High Security Mode
(1) Set the value of the code FS-08-8911 (Security mode level setting) to “3” (High). Then restart the
equipment.
(2) A key-shaped icon appears at the bottom of the touch panel, indicating that it is now in the High
Security Mode.
(3) Press [COUNTER] button on the control panel. If a key-shaped icon, indicating that the HDD
data are being encrypted, a paper-shaped icon indicating that the Data Overwrite Enabler is
operating normally and the version name of the installed system ROM (SYS V4.0) are displayed
on the top right of the counter menu, this means the mode is operating normally.
(4) Reset the user data backed up in advance.
Downloaded from Downloaded to
Compatibility
of cloning data
Normal mode Normal mode Yes
Normal mode High Security Mode No
High Security Mode Normal mode No
High Security Mode High Security Mode Yes