Toshiba E-STUDIO2008A Скачать руководство пользователя страница 365

Страница: 365 / 1016

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A

SELF-DIAGNOSTIC MODE

5 - 47

5.15 [75 File System Recovery Mode]

5.15.1

Overview

This is a mode to check if there is any damage to the file system (HDD) and recover it if necessary. Use
this mode only in the following cases.
•

There is a possibility of damage to the file system (HDD).

•

There is an apparent damage to the file system (HDD), requiring recovery or initialization.

This mode enables you to have the following functions.

5.15.2

Operation procedure

(1)

Perform [HS-75] by pressing the [75 File System Recovery Mode] icon.
The following screen appears.

Fig.5-32

(2)

Press the icon to operate.

Notes:

•

Do not turn the power OFF with the [MAIN POWER] button after the processing has started
(while the processing is being performed).

•

After the processing is completed, a beep sounds 4 times and either "Completed" or

•

"Failed" appears on the screen.

Remarks:

When the mode is started, "1. Check F/S" is selected by default.

Content

Functions

Check F/S

Checks the file system.

Recovery F/S

Recovers the file system.

Initialize HDD

Initializes partitions in the HDD.

Initialize DB

Initializes database (LDAP DB/log DB/language DB).

SMART Info

Displays the various information in the HDD.

DISK Info

Displays the usage rate of HDD.

HDD Utility

Initializes log files.

File System(F/S) Recovery Mode -> Check F/S

Please Select Mode

>1. Check F/S
2. Recovery F/S
3. Initialize HDD
4. Initialize DB
5. SMART Info
6. DISK Info
7. HDD Utility

Содержание E-STUDIO2008A









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание E-STUDIO2008A

Отзывы:

Toshiba E-STUDIO2008A, Руководство по обслуживанию, Страница: 365 / 1016

Результаты поиска

Содержание E-STUDIO2008A

Отзывы: