Toshiba e-STUDIO GL-1020 Скачать руководство пользователя страница 168 | Manualshive

Страница: 168 / 323

Toshiba e-STUDIO GL-1020 Скачать руководство пользователя страница 168

04_NetworkingClientSoftware.fm Modified: 9/19/02
Template Version 1.0

168

GL-1020 Administrator’s Guide

INSTALLING WINDOWS

®

SOFTWARE

The basic GL-1020 client software includes the GL-DocMon
print job monitoring utility, printer drivers for PCL and PostScript
(PS), the GL-TWAIN driver, and the AGFA Font Manager.

Considerations and Limitations

The GL-DocMon utility monitors only GL-1020, GL-1010,
and SC-2 devices. It does not support any third party printer
drivers. GL-DocMon cannot locate or interrogate the
controller if it has been set up as a NetWare NDPS printer or
NPRINTER.

End users must install a GL-1020 printer driver and map it to
the GL-1020 controller in order to access it using
GL-DocMon.

Users can view all jobs in the print queue, including
controller-resident jobs, but can only delete their own jobs.

Prerequisites

Make sure that the client workstation meets the following
minimum requirements:

Windows

®

98

Novell Client v3.1 and Client Service Pack 1 are required
to run IPX-based SNMP access and Novell printing.

The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.

Windows

®

Me

Novell Client v3.3 is required to run IPX-based SNMP
access and Novell printing.

The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.

Windows NT

®

4.0

Microsoft Service Pack 5 or higher

Novell Client v4.6 or higher with Z.E.N works Starter
Pack and Service Pack 1 are required to run IPX-based
SNMP access and Novell printing.

The Microsoft Client for NetWare may be used instead of
the Novell Client except for NDPS printers.

«
...
166
167
168
169
170
...
»

Содержание e-STUDIO GL-1020




































































































































































































































































































































Отзывы:

Нет отзывов