Toshiba e-STUDIO GL-1020, Руководство администратора, Страница: 140 / 323

04_NetworkingNovell.fm Modified: 9/19/02
Template Version 1.0
140
GL-1020 Administrator’s Guide
you extract the support pack compressed file, you must copy the
UNI*.NLM files and LOCNLM32.NLM to SYS:\SYSTEM
directory on the server.
Setup
1 Insert thee-STUDIO GL-1020 Admin’s Client CD-ROM into
the CD-ROM drive on the administrative workstation.
2 Copy tndps.exe, the self extracting executable file from the
CD-ROM to the workstation. Double-click the file to launch
the InstallShield setup program.
3 Follow the Setup Wizard’s prompt to supply the server
volume or
Browse
to select a mapped drive.
4 Click
Next
to proceed with installation. When the NDPS
Gateway and NetWare snap-in components have been
installed, you can configure the GL-1020 as an NDPS object.
Setting up the GL-1020 as an NDPS Object
Considerations and Limitations
The GL-1020 should be automatically discovered by the
TOSHIBA NDPS Gateway. If not, manually create a new NDPS
Printer Agent. (See
Create a Printer Agent on page 141.)
Prerequisites
1 Load NWADMN32.EXE on the administrator workstation to
launch the NetWare administration program.
2 Determine the Tree or Context under which to install the
NDPS printer agent.
3 Verify that both a NDPS Manager and Broker object exist at
this level. If not, create them.
4 Add drivers to the NDPS Broker. They can then be selected
from the drivers list and associated with the Printer Agent.
Add Drivers to the NDPS Broker
1 Launch NWAdmin.
2 Double-click the Broker icon.
3 Click
Resource Management
(RMS).
4 Click
Add Resources
.