Toshiba e-STUDIO GL-1020, Руководство администратора, Страница: 155 / 323

04_NetworkingUnix.fm Modified: 9/19/02
Template Version 1.0
GL-1020 Administrator’s Guide
155
For LINUX , enter the following command:
tar xvf linux.tar
The command extracts all the required files and installs them
in the correct locations.
MANAGING UNIX PRINT QUEUES
Considerations and Limitations
„
You must have root privileges to create a print queue.
Prerequisites
„
Locate the GL-1020’s IP Address if you will be accessing the
device by entering its IP Address.
„
Alternatively, add the device host name to the /etc/hosts file
using either the
admintool
command for Solaris or IBM
AIX, or the
sam
command for HP-UX or the
linuxconf
command for Linux.
Unix Queue Setup
Creating a Print Queue
1 Log on to the root account.
2 Enter the following command:
gl1020add <queue name> <host name or IP
address>
This command creates a print queue using the system’s
lpadmin
command. It also creates a configuration file that
has the destination IP address or host name. Use the
configuration file to change print queue parameters.
The
lpadmin
command stores the printer interface file in the
/etc/lp/interfaces
directory in a file with the same
name as the print queue. The configuration file is stored in
the
/etc/lp/interfaces
directory in a file named
<queue name>.conf
.
Under Linux, the
printtool
(or equivalent) utility must be
used to add the printer into the
lp
printing system after
executing the
gl1020add
command.