Toshiba e-studio 160 Скачать руководство пользователя страница 77

Страница: 77 / 182

4-25

9. JOB BUILD

This function allows up to five sets of originals to be scanned and stored separately and then to be
copied and output all at once.

Press the

key on the control panel while in the

initial screen for copying. The "EDIT MENU" screen

appears.

Press the

key to display the "JOB BUILD."

Then press the

key.

Press the

key to display the "ON." Then press

the

key.

The "JOB BUILD: ON" screen appears. Press the

key to return to the initial screen for copying.

Select the desired paper cassette, image density,

reproduction ratio and copy quantity.

Place the original on the glass or feed tray and press

the

key.

After the original is scanned, the screen on the right

appears.

• When scanning the next original without changing any

settings, place it on the glass or feed tray and select "Scan

next page." Then press the

key.

• In scanning the next original, if the scan density and Edge

Erase settings are changed, select "Change current settings"

to change the settings. Then press the

key.

• When all originals have been scanned, select "End job build"

to start copying automatically. Then press the

key.

JOB BUILD

Scan next page

End job build

Change current setting

Scanning in memory

Scanning Page

:XXX

READY

ANNOTATION

:OFF

EDITING

:OFF

JOB BUILD

:ON

JOB BUILD

OFF

READY

ANNOTATION

:OFF

EDITING

:OFF

JOB BUILD

:OFF

Note

To select the paper cassette, press the

key, select AMS

and then select the desired paper cassette.

Содержание e-studio 160






















































































































































































Результаты поиска

Содержание e-studio 160

Отзывы:

Похожие инструкции для e-studio 160

Бренды по названию

Популярные бренды

Toshiba e-studio 160, Руководство оператора по функциям копирования

Результаты поиска

Содержание e-studio 160

Отзывы:

Похожие инструкции для e-studio 160

Бренды по названию

Популярные бренды