Toshiba e-studio 160, Руководство оператора по функциям копирования

Страница: 65 / 182

4-13
1
2
3
4
5
6
7
9
10
11
12
8
3. IMAGE SHIFT COPYING
You can create margins on the copy and specify the position of these margins on either the right or the
left side of the copy. You can also create margins on copies of book originals using DUAL PAGE mode.
Page 4-12.
The default margins is approximately 7 mm, but you can select any margin between 4 and 15 mm.
Example of Image Shift Copying
1 Press the key on the control panel while in the
initial screen for copying. The “EDIT MENU” screen
appears.
2 Press the key to display “IMAGE SHIFT.” Then
press the key.
3 Select on which side the margin is to be created.
Then press the key.
• Select either “LEFT MARGIN” or “RIGHT MARGIN” to be
set.
4 Specify the margin by using the or key.
Press the key.
• The default margin is 7 mm.
• Any value ranging from 4 mm to 15 mm is acceptable.
5
Upon pressing the key, the programmed margin
appears on the screen. Press the key to return
to the initial screen for copying.
6 Place the originals on the feed tray or on the glass.
7 Select the desired paper cassette, image density,
reproduction ratio and copy quantity.
READY 1
DUPLEX :1>1
DUAL PAGE :OFF
IMAGE SHIFT :OFF
8
Press the key.
Margin on left side Copy Margin on the right side Copy
IMAGE SHIFT 1
OFF
LEFT MARGIN
RIGHT MARGIN
LEFT MARGIN 1
15mm
7mm
4mm
READY 1
DUPLEX :1>1
DUAL PAGE :OFF
IMAGE SHIFT :L- 7mm