Toshiba e-studio 160, Руководство оператора по функциям копирования

Страница: 13 / 182

9
1
2
3
4
5
6
7
9
10
11
12
8
2. General Precautions
1 Handle and use the machine gently and carefully.
• Do not place anything on the paper cassettes or original feed tray.
• Never allow the power cable to be trampled on or pinched between hard objects, otherwise an
accident or electrical trouble might occur.
• Do not allow any metal items such as paper clips to fall into the digital multi function system.
• Do not disassemble or modify the digital multi function system. This may result in electric shock,
hazard or machine malfunction.
3 It is recommended that only supplies made or designated by Toshiba be used for the
e-STUDIO160/200/250 in order to optimize copy quality. All supplies should be stored
in a cool, dry area.
For optimum performance, it is recommended that high quality 20-lb. Xerographic bond paper be
used.
Paper of lower quality may contain inherent properties such as excess paper dust and may lead to
premature servicing.
2 Be sure to turn OFF the power switch (unless using auto timer mode):
• When you leave your office at night.
• If a power failure occurs.
Caution
When turning OFF the power switch, be sure to do so only after the machine cycling has
come to a complete stop.
Be sure to disconnect the power-cord plug:
• When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch immediately and call for service:
• If an unusual noise is heard from the digital multi function system.
• If the outside of the digital multi function system becomes unusually hot.
• If any part of the digital multi function system is damaged, or it has been dropped.
• If the digital multi function system has been exposed to rain or liquid.
Warning label
Identification label