Toshiba e-studio 160, Руководство оператора по функциям копирования

Страница: 33 / 182

2-5
1
2
3
4
5
6
7
9
10
11
12
8
Placing the Original on the Glass
Sheet Originals
1
Raise the original cover or the automatic document
feeder (optional) and place the original on the glass
facing down.
3
Lower the original cover or the automatic document
feeder (optional) slowly.
2 Align the original against the left inner corner of the
glass.
Tip
When copying originals with high transparency, such as an
OHP film and tracing paper, place a blank sheet of paper the
same size as the original or larger over the original.
Book-type Originals
1 Raise the original cover or the automatic document
feeder (optional) and set the original in the direction
shown in the figure.
• If the original is not set in the correct direction, copies will
not be delivered in the correct page order.
2
Lower the original cover or the automatic document
feeder (optional) slowly.
• Do not try to force the original cover or reversing automatic
document feeder (optional) to fully close over a very thick
original, such as a large book. Copies can be made if the
cover or feeder does not close fully.
• During copying, an intense light may leak out. Do not look
at the original glass surface.
Automatic
document
feeder
Original
Original scale
Blank sheet
Original