Web Control Panel
50
Batch Folder Report File
The Batch Folder Report contains a list of user names and their file processing parameters, as
defined on the Batch Rule of the e-BRIDGE Re-Rite Web Control Panel.
The following information is included for each user:
User name.
Assigned output file format and corresponding file output path (in parenthesis).
Actual network file output path, which can be copied and pasted into the network
path of the "Scan to File" template. Refer to your Toshiba MFP user guide for
further information about the creation of Scan Templates.
Batch Share Statistics
The Batch Folder Report also contains the Batch Share Statistics, which shows the number of
shared folders categorised by their security level.
Please note that the level of security applied to shared network folders requires consultation
with your Network Administrator.
The information below summarises how these permissions have been set.
Low Security
- e-BRIDGE Re-Rite uses the Windows default share C$. (C: drive is
shared by default as C$)
These users need to log on as an administrator, or have administrative rights,
when using e-BRIDGE Re-Rite, therefore we do not recommend this method.
Please use the methods below for higher security.
Medium Security
- The e-BRIDGE Re-Rite “Batch” folder (e.g. C:\Re-Rite\Batch1)
is shared.
High Security
- The output format folder and one or more user folders are shared
(e.g. C:\Re-Rite\Batch1\PDF3\Frank).
