Installation
1
Installation
System Requirements
The following table describes the minimum requirements for installing and running the e-
BRIDGE Re-Rite software.
It is important to remember that these are recommendations only and the system
requirements for individual environments may vary.
A working SMTP server is required for sending e-mail.
Required
Recommended
Processor
Pentium IV 2.66GHz or equivalent
Pentium Dual CPU 1.60GHz (or better)
RAM
512MB
1GB (or more)
Free Disk Space
200MB for so additional
space for data if stored on the
same system
200MB for so additional space for
data if stored on the same system
Supported Platforms
e-BRIDGE Re-Rite 8.1.0 has been tested on the following Operating Systems:
Windows Server 2003 R2 32-bit
Windows Server 2003 R2 64-bit
Windows Server 2008 32-bit
Windows Server 2008 R2 64-bit
Windows XP Professional SP3 32-bit
Windows Vista Business SP2 32-bit
Windows 7 Ultimate/Professional/Enterprise SP1 32-bit
Windows 7 Ultimate/Professional/Enterprise 64-bit
VM ware Platforms
Windows Server 2003 R2 32-bit
Windows Server 2003 R2 64-bit
Windows Server 2008 32-bit
Windows Server 2008 R2 64-bit
Windows XP Professional SP3 32-bit
Windows Vista Business SP2 32-bit
Windows 7 Ultimate/Professional/Enterprise SP1 32-bit
Windows 7 Ultimate/Professional/Enterprise 64-bit
RESTRICTION:
MAC address allocation in Virtual Machines should be static for all
clients installing e-BRIDGE Re-Rite software.
Web Browser
IE 7, IE 8, Firefox 3.6, Google Chrome 7 & 8
Screen Resolution
15" or 17" display at 1024 x 768 pixels
Network Card
10/100BaseT/X for MFP access
CD ROM
For installation
Toshiba Multifunction
Device
eSTUDIO MFP with scan feature utilising e-BRIDGE 1, 2 and 3 architecture.
Check with a Toshiba representative for the latest product compatibility.
A dedicated PC that is available on the network at all times is recommended for hosting the
software. This may be a server system.