11
Remote control buttons
5.375 x 8.375 ver 3.1
Installing the battery
Install the battery, matching the polarity indicated inside battery compartment of the remote
control.
1
Open the battery cover.
(Sample Illustration) Remote control - Opening the battery cover
2
Insert one R03 battery.
Make sure to match the polarity marks (+ / -) on the batteries to the marks indicated in the
battery compartment.
3
Close the battery cover.
Risk of explosion!
Keep the battery away from heat, sunshine or fire. Never discard a battery into a fire
Always dispose of a used battery in compliance with your local government.
If the remote control does not operate correctly, or if the operating range is reduced, replace
the battery with a new one.
If the battery is dead or if you will not be using the remote control for a long time, remove the
battery to prevent battery acid from leaking into the battery compartment.
Using the remote control
Point the remote control at the remote sensor and press the buttons
(Sample Illustration) Remote control distance and angle
The maximum operable ranges from the unit are as follows:
Line of sight:
Approximately 10m
Either side of the center
: Approximately 7m within 30°.
Above
: Approximately 7m within 30°.
Below:
Approximately 7m within 30°.
7 m 10 m
7 m
