Toshiba 40SL500U, Руководство пользователя

Страница: 59 / 94

59
Chapter 7: Picture and sound controls
MPEG NR
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
From the
PICTURE
menu, highlight
A d vance d
Picture S ettin g s and press .
2
Press
B
or
b
to select
Noise Re d uction
and press
.
3
Press
B
or
b
to highlight
MPE G NR
.
4
Press
C
or
c
to select either Low , Mi dd le , Hi g h or
Off and press .
Note: If the Picture Mode is set to Game or PC , this feature
will be grayed out.
DNR
DNR enables you to “soften” the screen representation
of a weak signal to reduce the noise effect.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press .
2
Press
B
or
b
to select Noise Re d uction and press
.
3
Press
B
or
b
to select DNR .
4
Press
C
or
c
to select Low , Mi dd le , Hi g h , Auto or
Off and press .
Note:
•
If the Picture Mode is set to Game or PC , this feature will
be grayed out.
• The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).
Auto Brightness Sensor
When the Auto Brightness Sensor feature is set to
On
,
the TV will automatically optimize the backlighting
levels to suit ambient light conditions.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press .
2
Press
B
or
b
to select Auto Bri g htness S ensor
S ettin g s and press .
3
Press
B
or
b
to highlight Auto Bri g htness S ensor .
4
Press
C
or
c
to select On or Off and press .
Note: When the Picture Mode is set to AutoView , this
feature will be automatically set to On and grayed out.
Backlight Adjustment Pro
This feature adjusts the backlight so that it can change
to match the ambient light conditions.
1
From the PICTURE menu, highlight A d vance d
Picture S ettin g s and press .
2
Press
B
or
b
to select Auto Bri g htness S ensor
S ettin g s and press .
3
Press
B
or
b
to highlight Backli g ht A d justment
Pro and press . The Backlight Control Level
window will appear.
4
Press to display the adjustment window. Press
C
or
c
to select the point and press
B
or
b
to adjust the
level. The adjustment range is from 0 to 100.
5
Press to fix the adjustment.
To cancel the adjustment when selecting a point,
select
Cancel
on the screen.
To revert the adjustments of all points to the factory
defaults, select
Reset on the screen and press .
Note:
If the
Auto Brightness Sensor
is set to
Off
, this
feature will be grayed out.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Backlight Adjustment Pro
100
0
Backlight Control Level
Control
Level
Am b ient Light
3 7
Cancel
Reset
OK
OK