29
To listen to stereo sound:
1
Press
MTS
on the remote control to display
Audio
menu with
MTS
highlighted.
Treble
Balance
Surround
Bass
MTS
Audio
MENU
Back
Watch TV
EXIT
Stereo
0
0
0
Off
2
Repeatedly press
MTS
or press
1
or
2
to
select
Stereo
.
Note:
• You can leave the MTS feature in
Stereo
mode and it will automatically output the
type of sound being broadcast (stereo or
monaural).
• If the stereo sound is noisy, select
Mono
to
reduce the noise.
To listen to a second audio program on an
analog station (if available):
Select
SAP
in step 2 above.
Note:
• A second audio program (SAP) can be heard
only on those TV stations that offer it. For
example, a station might broadcast another
language as a second audio program. If you
have SAP on, you will see the current program
on the screen but hear the other language
instead of the program’s normal audio.
• If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station’s normal audio will be
output. However, occasionally there is no
sound at all in
SAP
mode. If this happens, set
the
MTS
feature to
Stereo
mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the
bass, treble, and balance.
To adjust the audio quality:
1
Press
MENU
, then press
1
or
2
to display
Audio
menu.
2
Press
s
or
t
to highlight the item you want
to adjust (
Bass
,
Treble
, or
Balance
).
Treble
Balance
Surround
Bass
MTS
Audio
MENU
Back
Watch TV
EXIT
Stereo
50
0
0
Off
3
Press
1
or
2
to adjust the level.
Selection
1
Pressing
2
Bass
weaker
stronger
Treble
weaker
stronger
Balance
increase the
balance in the
left channel
increase the
balance in the
right channel
Selecting the Audio mode
You can select your desired audio settings from
three different modes, as described below.
Mode
Sound quality
Theater
for a movie theater fi lled
with a dynamic sound
Vocal
for news/dialogue
Memory
the sound quality you set
To select the audio mode:
Press
AUDIO
on the remote control.
The following popup menu appears on-screen.
Theater
Repeatedly press
AUDIO
to cycle among the
modes.
Selecting the surround sound
1
Press
MENU
, then press
1
or
2
to display
Audio
menu.
2
Press
s
or
t
to highlight
Surround
.
3
Press
1
or
2
to select
On
or
Off
.
Note:
When
Surround
is set to
On
.
Balance
control will not be available.
Chapter 5: Using the TV’s features
20DL77_En_new23.indd 29
20DL77_En_new23.indd 29
6/13/07 3:50:57 PM
6/13/07 3:50:57 PM
