23
Selecting the video input source to
view
Repeatedly press
INPUT
on the remote control
or on the TV control panel to view a signal
from another device connected to your TV,
such as a VCR or DVD player. You can select
Video1
/
S-Video
,
Video2
/
ColorStream
,
PC
or
Antenna/Cable channel, depending on which
input jacks you used to connect your devices
(
☞
Chapter 2).
To select the video input source using the
program list:
1
Press and hold
INPUT
or press
OK
to display
the program list.
PC
2
7
9
99
9
8
2
PC
Video2
Video1
Video1
Video2
INPUT:
(Press and hold)
OK:
2
To scroll through the program list, repeatedly
press
s
or
t
while the program list is on-
screen.
To view signal connected to Video-1 IN,
select
Video1
/
S-Video
.
To view signal connected to Video-2 IN,
select
Video2
/
ColorStream
. (Component
video input).
To view signal connected to PC IN, select
PC
.
To view Antenna/Cable channel, select the
desired channel number.
3
When the desired video input mode is
highlighted, press
OK
.
Tuning channels
Tuning to the next programmed channel
To tune to the next programmed channel:
Press
CH
s
or
CH
t
on the remote control or
TV control panel.
Note:
This feature will not work unless you
program channels into the TV’s channel memory
(
☞
page 22).
Tuning to a specifi c channel (programmed
or unprogrammed)
Press the Channel Number buttons (0–9, 100)
on the remote control. For example, to select
channel 125, press 100, 2, 5.
Tuning to a specifi c programmed channel
(or video mode) using the Program list
Press
OK
to display the Program list, and then
press
s
or
t
to scroll through the Program list.
When the desired channel number (or video
mode) is highlighted, press
OK
.
PC
2
7
9
99
9
8
Video2
Video1
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch
between two channels without entering an actual
channel number each time.
1
Select the fi rst channel you want to view.
2
Select a second channel using the Channel
Number buttons (0–9, 100).
3
Press
CH RTN
on the remote control. The
previous channel will display. Each time you
press
CH RTN
, the TV will switch back and
forth between the last two channels that were
tuned.
Note:
If you press
CH RTN
from a non-
antenna input, the TV will return to the last-
viewed channel or video input mode.
Chapter 5: Using the TV’s features
20DL77_En_new23.indd 23
20DL77_En_new23.indd 23
6/13/07 3:50:55 PM
6/13/07 3:50:55 PM
