Toshiba 19LV505 Скачать руководство пользователя страница 14

Страница: 14 / 156

Basic playback

Press STOP to end playback.

• •••

Resuming facility

• The unit records the stopped

point, depending on the disc.

“

” appears on the screen.

Press

PLAY

to resume playback

(from the scene point).

• If you press

STOP

again

(“

• •

” appears on the TV screen.),

the unit will clear the stopped
point.

On the TV screen, “

” changes to “Reading” and

then playback commences.

DVD
VCD

Preparations:

• When connecting to other equipment, turn the power off.

Press POWER on the unit or on the remote con-
trol to turn on the unit

• POWER indicator on the front of the unit changes

green. It may take approx. 10 seconds for a picture
to appear on screen.

• Every time you press

POWER

, the TV/DVD starts

from TV mode.

• When using an ampliﬁ er, switch on the ampliﬁ er.

Press TV/DVD on the remote control to select DVD
mode.

The DVD startup screen will appear on the TV screen.

Load a disc in the disc slot.

Basic playback

• Load the disc in the disc slot with the label side fac-

ing forward. (If the disc has a label.) Hold the disc
without touching either of its surfaces, align it with
the guides, and place it in position.

• If a disc is inserted during some modes other than

DVD mode, it may switch to DVD mode and then
playback may be begun automatically.

A menu screen will appear on the TV screen if the
disc has a menu feature.
Press

/ or / on the remote control

select title, then press

ENTER

. Title is selected and

play commences.

• •••

To start playback in the stop mode

Press

PLAY

Note:

If the unit does not operate properly:

Static electricity, etc., may affect the TV/DVD

••

s operation. In such

case, disconnect the AC cord, then connect it again.

Playing a disc

This section shows you the basics on how to play a disc.

CAUTION

Keep your ﬁ ngers well clear of the disc slot when disc is
loading or unloading. Neglecting to do so may cause serious
personal injury.

Press or – to adjust the volume.

Reading

EJECT

POWER

PLAY

STOP

/–

ENTER

PLAY
STOP

TV/DVD

/ / /

POWER

VOL

+/–

Volume : 25

J50S0101A.indb 44

1/19/08 2:41:56 PM

Basic playback

To pause playback (still mode)

Press

PAUSE

during playback.

To resume normal playback,
press

PLAY

• The sound is muted during still

mode.

To stop playback

Press

STOP

To remove the disc

Press

EJECT

Remove the disc after the disc comes
out.

Note:

•

If a non-compatible disc is loaded, “Incorrect Disc”, “Region Code Error” or “Parental Error” will appear on the TV screen

according to the type of loaded disc. In this case, check your disc again (see pages 7 and 64).

•

Some discs may take a minute or so to start playback.

•

When you set a single-faced disc label downwards (ie. the wrong way up), “Reading” will appear on the display for a few

minutes and then “Incorrect Disc” will continue to be displayed.

•

Some discs may not work the resuming facility.

•

Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 53.

•

Some playback operations of DVDs may be intentionally ﬁ xed by software producers. Since this unit plays DVDs according

to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.

•

Do not move the unit during playback. Doing so may damage the disc.

•

Use the

EJECT

to unload and eject the disc.

•

Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.

•

In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen

menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press

POWER

on the remote control once the movie is completed.

•

There may be a slight delay between the button is pressed and the function activates.

To obtain a higher quality picture

Occasionally, some picture noise may appear on the TV screen while playing a

DVD video disc because the high resolution pictures on these discs include a
lot of information. In such case, you may reduce the Sharpness with the Picture
Setting menu (see page 36).

About

DVD

VCD

The

DVD

VCD

icons on the heading bar show the playable discs for the

function described under that heading.

: You can use this function with DVD video discs.

VCD

: You can use this functio n with Video CDs.

: You can use this function with Audio CDs and CD-R/RW CDs.

DVD
VCD

Basic playback (continued)

PAUSE

STOP

PLAY

EJECT

J50S0101A.indb 45

1/19/08 2:41:58 PM

Basic playback

Playing frame by frame

Playing in fast reverse or fast forward directions

Press REV or FF during playback.

REV

: Fast reverse playback

: Fast forward playback

Each time you press

REV

button, the playback speed changes.

To resume normal playback

Press

PLAY

Press PAUSE during still playback.

Each time you press

PAUSE

, the

picture advances one frame.

To resume normal playback

Press

PLAY

Note:

• The sound is muted during frame by frame playback.
• You can use frame by frame playback for DivX

CD.

Press SLOW

(REVERSE) or

(FORWARD)

during playback.

Each time you press the button, the
slow-motion speed changes.

To resume normal playback

Press

PLAY

Note:

• The sound is muted during slow-motion playback.
• The Video CD cannot play Reverse Slow.

Press SKIP

repeatedly to display the chapter or track number you want.

Playback starts from the selected chapter or track.

Playback starts from the beginning of
the current chapter or track.
When you press twice in quick successions,
playback starts from the beginning of
the preceding chapter or track.

Note:

• A “Prohibition” symbol “

• •

” may appear at the upper right of the screen. This symbol means either the feature you tried is not

available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the

TV/DVD.

DVD
VCD

Playing in slow-motion

Locating a chapter or track

DVD

VCD

DVD

VCD

Note:

• The TV/DVD mutes sound during reverse and forward scan

of DVD/VCD/Audio CD discs.

• The playback speed may differ depending on the disc.
• You can use fast reverse/fast forward playback for DivX

CD.

SLOW

PAUSE
PLAY

REV

/ FF

To locate succeeding chapters or tracks.

SKIP

Playing a disc (Continued)

J50S0101A.indb 46

1/19/08 2:41:59 PM

Advanced playback

Press

to view a different part of the

frame.

You may move the frame from
the center position to UP, DOWN,
LEFT or RIGHT direction.

In the zoom mode, press ZOOM repeatedly to
return to a 1:1 view (

Off).

Zooming

Press ZOOM during playback.

The center part of the image will be
zoomed in.
Each press of

ZOOM

will change

the ZOOM

1 (x 1.3),

2 (x 1.5)

and

3 (x 2.0).

Zooming/Locating desired scene

This unit will allow you to zoom in on the frame image. You can then make
selections by switching the position of the frame.

Use the title, chapter and time recorded on the DVD disc to locate the
desired point to playback. In the case of VCD/Audio CD discs, time and
track are used to locate the desired point to playback.
To check the title/track, chapter/track and time, press

DISPLAY

Note:
•

In case of the Audio CD and Video-CD, only Track and Time
can be selected.

• In case of the Video-CD playback with PBC, the JUMP does

not work. To turn off PBC, see page

•

Only Time search function can be used for DivX® CD.

Locating desired scene

DVD
VCD

Press Number buttons (0–9) to input the number.

Note:

• You can select the Pause, Slow or Search playback in the
zoom