17
Auto installation
When you turn on the TV for the first time, the Automatic Installation routine is activated. This routine helps you
select the on-screen language and perform an auto programme search using the TV’s built-in tuner.
If you are using an external TV receiver (e.g. for satellite or digital TV), you need to tune it separately according to
its own instructions.
1
Make sure that the aerial and power connections are made, then press
on the
TV or on the remote control to turn on the TV.
The power indicator on the front of the TV changes to green.
2
On the “Auto Installation” menu, the
Language option is automatically
highlighted. Press
to select the
preferred language.
3
Press
to select “Auto Tuning”,
then press
ENTER
.
4
The confirmation message will appear.
Check your aerial connection, then
press
ENTER
.
The TV will now automatically detect all
available channels in your area and
store them in the TV’s memory.
Note:
Please be patient. The Auto
Tuning process can take several
minutes to complete.
When the “Programming Now” status
bar is completely highlighted, the Auto
Tuning process is complete.
Notes:
• To cancel the Auto
Tuning process,
press
ENTER
.
• The Automatic
Tuning process will
only start by itself the
first time you switch
the TV on. To enable
“Auto Tuning” in a
later time, see page
19.
/
/
Auto Tuning
