10
Remote control
Battery installation
Battery precautions
Transmission range
Aim the remote control at the remote sensor and press the control buttons to operate. Make sure the
remote control is within approximately five meters and 30° angle (on either side) of the remote sensor.
Notes:
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
remote sensor, the remote operation may become unstable.
• When there is an obstacle between the TV and the transmitter, the remote control transmitter may
not operate.
1
Open the battery
compartment cover in the
direction of the arrow.
2
Install two “R03/AAA/UM-4”
(penlight size, supplied) batteries,
paying attention to the polarity
indicated in the battery
compartment.
3
Close the battery
compartment.
• Use two “R03/AAA/UM-4” size penlight batteries for the remote control.
• If the remote control does not operate correctly, or if the operating range becomes reduced
(i.e., you need to get closer to the TV to use the remote control), replace batteries with new ones.
• Do not mix old and new batteries.
• Weak batteries can leak and severely damage the remote control transmitter. Always remove
batteries if they become weak or if the remote control is not to be used for an extended period
of time.
• Dispose of batteries in designated disposal area.
• Never throw batteries into the fire.
• Never expose batteries to excessive heat such as sunshine, fire or the like.
19, 22, 26, 32-inch models
15-inch model
5 meters
5 meters