Toro TX 427 22342HD, Руководство оператора

Страница: 19 / 52

Moving a Non-Functioning
Traction Unit
Important:
Do not tow or pull the traction unit without
first opening the tow valves, or the hydraulic system will
be damaged.
1. Shut off the engine.
2. Open the rear-access cover.
3. Using a wrench, turn the tow valves on the hydraulic
pumps twice counter-clockwise (
Figure 18 ).
Figure 18
1. Left tow valve (right track) 2. Right tow valve (left track)
4. Tow the traction unit as required.
5. When the traction unit has been repaired, close the tow
valves before operating it.
Using the Cylinder Lock
WARNING
The loader arms may lower when in the raised
position crushing anyone under them.
Install the cylinder lock before performing
maintenance that requires raised loader arms.
Installing the Cylinder Lock
1. Remove the attachment.
2. Raise the loader arms to the fully raised position.
3. Shut off the engine.
4. Remove the lynch pin securing the cylinder lock to the
loader arm (
Figure 19 ).
G004182
3
2
1
Figure 19
1. Cylinder lock 3. Lynch pin
2. Lift cylinder
5. Lower the cylinder lock over the cylinder rod and
secure it with the lynch pin (
Figure 19 ).
6. Slowly lower the loader arms until cylinder lock
contacts the cylinder body and rod end.
Removing/Storing the Cylinder Lock
Important:
Ensure that the cylinder lock is removed
from the rod and fully secured in the storage position
before operating the traction unit.
1. Start the engine.
2. Raise the loader arms to the fully raised position.
3. Shut off the engine.
4. Remove the lynch pin securing the cylinder lock.
5. Rotate the cylinder lock up to the loader arm and
secure it with the lynch pin.
6. Lower the loader arms.
19