Checking the Shear Bolt on
the Platform
Service Interval:
Before each use or daily
Check the shear bolt (
) for wear, cracks, or damage
every day after approximately 8 operating hours. Replace it
if it is damaged.
Figure 62
1.
Shear bolt
Cleaning
Removing Debris from the
Traction Unit
Service Interval:
Before each use or daily
Important:
Operating the engine with blocked screens
and/or cooling shrouds removed will result in engine
damage from overheating.
1.
Park the traction unit on a level surface, lower the
loader arms, and shut off the engine.
2.
Remove the key and allow the engine to cool.
3.
Open the hood.
4.
Clean any debris from the front and side screens.
5.
Wipe away debris from the air cleaner.
6.
Clean any debris buildup on the engine and in the oil
cooler fins with a brush or blower.
Important:
It is preferable to blow dirt out, rather
than washing it out. If water is used, keep it away
from electrical items and hydraulic valves. Do
not use a high-pressure washer. High-pressure
washing can damage the electrical system and
hydraulic valves or deplete grease.
7.
Clean debris from the hood opening, muffler, and heat
shields.
8.
Close the hood.
44
Содержание TX 427 22342HD
Страница 49: ...Schematics g013124 Electrical Schematic Rev B 49...
Страница 50: ...Hydraulic Schematic Rev A 50...
Страница 51: ...Notes...
