Toro TX 427 22342HD, Руководство оператора

Страница: 12 / 52

Product Overview
Figure 4
1. Track 5. Loader arms 9. Mount plate 13. Fuel tank
2. Track-adjustment chamber 6. Hood 10. Tie-down/lift loop 14. Reverse-safety plate
3. Lift cylinder 7. Auxiliary-hydraulic couplers 11. Control panel
4. Cylinder lock 8. Tilt cylinder 12. Rear-access cover
Controls
Become familiar with all the controls ( Figure 5 ) before you
start the engine and operate the traction unit.
Figure 5
1. Auxiliary-hydraulics lever 8. Loader arm/attachment tilt
lever
2. Throttle lever 9. Loader-valve lock
3. Choke lever 10. Parking-brake lever
4. Fuel gauge 11. Traction control
5. Hydraulic-fluid
temperature light 12. Reference bar
6. Hour meter/tachometer 13. Loader-control-reference
bar
7. Key switch
Key Switch
The key switch, used to start and shut off the engine, has 3
positions: O
FF
, R
UN
, and S
TART
.
•
To start the engine, rotate the key to the R
UN
position,
the glow-plug light comes on. When the glow-plug light
turns off, turn the key to the S
TART
position. Release the
key when the engine starts and it moves automatically
to the R
UN
position.
•
To shut off the engine, rotate the key to the O
FF
position.
Throttle Lever
Move the control forward to increase the engine speed and
rearward to decrease speed.
Choke Lever
Before starting a cold engine, move the choke lever forward.
After the engine starts, regulate the choke to keep the engine
running smoothly. As soon as possible, move the choke lever
all the way rearward.
Note:
A warm engine requires little or no choking.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary-hydraulics lever. To ensure smooth,
controlled operation, do not take both hands off the reference
bar while operating the traction unit.
12