Toro timecutter zs 4200t, Руководство оператора

Страница: 35 / 60

Important:
Do not clean the paper element with
pressurized air or liquids, such as solvent, gas,
or kerosene. Replace the paper element if it is
damaged or cannot be cleaned thoroughly.
Servicing the Engine Oil
Oil Type: Detergent oil (API service SF, SG, SH, SJ, or SL)
Crankcase Capacity:
Model Oil filter not removed Oil filter removed
74656 1.5 L (50.7 oz) 1.7 L (57.5 oz)
74660 1.8 L (60.9 oz) 2.1 L (71 oz)
Viscosity: See the table below.
g017470
SAE V iscosity Grades
SAE 40
SAE 30
SAE 10W – 30/ SAE 10W – 40
-20 0 20 32 40 60 80 100
-30 -20 -10 0 10 20 30 40
°F
°C
STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
SAE 5W – 20
Figure 38
Note:
Using multi grade oils (5W-20, 10W-30, and 10W -40)
will increase oil consumption. Check oil level more frequently
when using them.
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Note:
Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away the muffler and other hot surfaces.
Important:
Do not overfill the crankcase with oil and
run the engine; engine damage may result.
1. Park the machine on a level surface.
2. Disengage the blade-control switch (PTO).
3. Stop the engine, wait for all moving parts to stop, and
remove the key before leaving the operating position.
4. Check the engine-oil level ( Figure 39 ).
B
A
C D
E
G027659
F
G
H I J
Figure 39
35